16 · Preview

Playback & estimates

Feed-rate-accurate simulation and the time estimates.

Playback at 60 %: the finished part of the program is highlighted and the current G-code line is shown.
Playback at 60 %: the finished part of the program is highlighted and the current G-code line is shown.

Feed-rate-accurate simulation via the floating player bar: each move takes length ÷ programmed feed. 1× real = 100% machining speed; the tool marker glides along every move including rapids. The G-code tab highlights the current source line. Per-program times are in the sidebar layer menu; Σ est. below it is the total. Rapids are assumed at 2000 mm/min (G-code carries no rapid feed).